How to Use PS-1


PS-1(Application) Make sure the surface to be cleaned and dry. Apply PS-1 generously, in a well ventilated area, with an appropriate paint brush, hand held sprayer or Hudson sprayer and wipe off graffiti from hard smooth surfaces with a dry rag most graffiti will come off or loosen up instantly.

Older graffiti may need a few minutes of repeat application. Preferably, apply to approximately 2X2 area at a time. As soon as the graffiti is softened, wipe it off with a rag.

PS-1 is available in 4 or 6 gallons per case and 55 gallon non-returnable drums.

Disposal all graffiti and the cleaner as waste according to federal, state and local regulations,

Due cautions must be exercised when using this or any other graffiti remover, provide adequate Ventilation, wear chemical resistance gloves, goggles, apron and chemical resistance boots if Spillage is anticipated, Consult, MSDS before using

All statements, technical information and recommendations contained herein are based on information and tests we believe are reliable. The accuracy or completeness thereof are not guaranteed, since conditions of use are outside our control, the user shall, before using, determine suitability of the product for his/her intended use and the user assumes all risks and liability whatsoever in connection therewith.